of.boundary.nodal.velocity
==========================
.. raw:: html
.. role:: red
.. role:: blue
**of.**\ :red:`boundary.nodal.velocity` :blue:`*nodal_tag*` :blue:`x` :blue:`y` :blue:`r` :blue:`xtable` :blue:`ytable` :blue:`rtable`
|
Create the nodal velocity boundary on the nodal groups. r is for the angular velocity, in rad/s. The velocity can be time dependent if you use the table. The x, y, r values will be the factor if you use the table. That is
:math:`v[i] = x \times table[i]`
**Parameters:**
**nodal_tag:** tag of the group
**x:** (default 0.0) Velocity in the x direction or the amplitude of x table.
**y:** (default 0.0) Velocity in the y direction or the amplitude of y table.
**r:** (default 0.0) Angular velocity
**xtable:** (default -1) time dependent velocity in x direction.
**ytable:** (default -1) time dependent velocity in y direction.
**rtable:** (default -1) time dependent angular velocity.
|
Example:
--------------------------------------------------------------------
.. code-block::
# fix in x direction, y direction and rotation
of.boundary.nodal.velocity ‘up’ x 0.0 y 0.0 r 0.0
# assign the table which is named as pwave
of.boundary.nodal.velocity ‘up’ x 1.0 xtable ‘pwave’